000 04288ntm a2200361 i 4500
999 _c99928
_d99934
003 MY-KuUP
005 20251125110804.0
006 t||||fr|||| 000 0
008 230828t20232023my a|||fr|||| 000 0 eng d
020 _aTHE0009703 (Local)
_qHardback
040 _aUMP
_beng
_cUMP
_erda
090 _aFIM .C85 2023 r Thesis
100 1 _aNg Cui Ming,
_eauthor.
245 1 0 _aPerformance of hot mix asphalt containing glass powder as bitumen modifier /
_cNg Cui Ming
264 1 _aKuantan, Pahang :
_bUMP,
_c2023
264 4 _c©2023
300 _axvi, 118 pages :
_billustration (some col.) ;
_c30 cm. +
_e1 CD-ROM
336 _2rdacontent
_atext
336 _2rdacontent
_atext
337 _2rdamedia
_aunmediated
337 _2rdamedia
_acomputer
338 _2rdacarrier
_avolume
338 _2rdacarrier
_acomputer disc
347 _2rda
_atext file
_bPDF
500 _aFaculty of Civil Engineering Technology
502 _aThesis (Master of Science) -- Universiti Malaysia Pahang – 2023
504 _aIncludes bibliographical references
520 3 _aSolid waste management is a critical issue for society worldwide. Glass is widely used in our daily life, and around 10 million tonnes of waste and crushed glass will be produced in large cities worldwide, which compose about 3–5% of all household wastes. The use of waste glass as a component in asphalt mixture may help alleviate the burden faced by environmental authorities. Thus, this research was presented to investigate the performance of hot mix asphalt containing glass powder as bitumen modifier. The glass was ground to size passing 30μm sieve was used in this study. Bitumen 60/70 penetration grade was prepared to mix with variance percentage of glass powder at 2, 4, 6, 8 and 10%. The chemical and physical properties of glass powder as bitumen modifier was evaluated with various tests such as fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), X-ray fluorescence (XRF), field emission scanning electron microscopy (FESEM), scanning electron microscopy (SEM), softening point, penetration test and penetration index. Mechanical properties are then evaluated to determine the Marshall strength, indirect tensile strength, moisture susceptibility, Cantabro, resilient modulus and dynamic creep modulus. Design of experiment was used to analyse all collected data and determine the optimum percentage of additives. Response Surface Methodology was employed to produce mathematical models on the strength and moisture susceptibility of hot mix asphalt incorporating glass powder. The findings from chemical and physical properties reveals that the main chemical compositions of the glass powder are silicon oxide (SiO2). The glass powder as bitumen modifier was found to be effective in improve the mechanical properties of hot mix asphalt. Glass powder as bitumen modifier improves the Marshall stability and flow of asphalt mixture, indicates that the glass powder was able to resist deformation under imposed loads. Next, 8% glass powder shows higher indirect tensile strength which leads to improve the cracking resistance. Moreover, the tensile strength ratio of glass powder demonstrates the same pattern as indirect tensile strength. This is due to glass powder had better resistance to stripping and less susceptible to moisture damage. Furthermore, the stiffness is enhanced by the addition of 10% glass powder, which also increases the resilient modulus and the dynamic creep modulus, hence enhancing the resistance to fatigue and rutting. For statistical analysis, the strength and moisture susceptibility of asphalt mixtures have a curvilinear relationship with glass powder. Both factors had correlated using a second-order polynomials correlation, and resulting the mixed correlation has strong correlation with R2 value above 0.90. The findings show that the bitumen modifier with 4-10% of glass powder had improved the road pavements in mechanical performance. Finally, the study showed that hot mix asphalt containing glass powder has the potential to be used in the road industry.
610 2 0 _aFaculty of Civil Engineering Technology
_xDissertations
650 0 _aUniversities and colleges
_xDissertations
650 0 _aTheses
_xDissertations
942 _2lcc
_cTHESIS