Investigation of brass microstructure and mechanical properties using metal casting /

Nur Hamizah Minhat

Investigation of brass microstructure and mechanical properties using metal casting / Investigation of brass microstructure and mechanical properties using metal casting [computer file] Nur Hamizah Minhat - Kuantan, Pahang : UMP, 2010 - xiii, 53 p. : ill. ; 30 cm. + 1 computer disc

Project paper (Bachelor of Mechanical Engineering with Manufacturing Engineering) -- Universiti Malaysia Pahang - 2010

Bibliography: p. 50-51

Brass is a alloying of cooper and zine, alpha (a) brass are quite soft and ductile, the ductility of the a brasses actually increased zinc content. The maximum strength of brass is 538 Mpa attained at 44wt% zinc. while most brasses are nit normally ranked as 'heat tratable', some brasses of very closely controlled composition are cast or hot worked in the duplex a/B state and the annealed at about 450 C to convert the microstructure to an single phase of better resistance to corrosion by dezincification in aggressive supply waters.

THE0007734(Local)


Brass--Metallurgy

Perpustakaan Universiti Malaysia Pahang Al-Sultan Abdullah
26600 Pekan, Pahang Darul Makmur
Phone: +609 431 5063 (Gambang) / +609 431 5035 (Pekan)
Email: umplibrary@umpsa.edu.my

Connect With Us