Normal view MARC view ISBD view

Turbidity removal for plasticizer effluent via coagulation and flocculation process / Nur Fatihah Binti Ismail

By:

Nur Fatihah Binti Ismail [author.]

Material type: Text

text

Media type:

unmediated

Carrier type:

volume

ISBN:

THE0010627 (Local)

Subject(s):

Online resources:

Click here to access online

Dissertation note: Final Year Report (Bachelor of Chemical Engineering ) -- Universiti Malaysia Pahang Al-Sultan Abdullah - 2024 Abstract: The effluent from plasticizer manufacturing industry contains a high quantity of pollutants that are generated from chemical additives. This effluent has negative effects on human health and the environment. The source of industrial effluents highly influences the properties, composition, and content of pollutants. The objective of this research is to remove the turbidity in the plasticizer wastewater. This research is focused on coagulation and flocculation process. Polyaluminium chloride (PAC) and polyacrylamide (PAM) were used as coagulant and flocculant, respectively. Safely treating this wastewater before being disposed to the natural water sources is essential for attaining the SDGs particularly Goal which is life below water. Via Newton’s optimization method, the optimum condition in removing turbidity was at 1.55 mL of polyarylamide dosage with a percentage removal of 20.69%.

Tags from this library: No tags from this library for this title. Log in to add tags.

Average rating: 0.0 (0 votes)

Holdings ( 1 )
Title notes ( 4 )

Holdings
Item type	Current library	Call number	Status	Date due	Barcode
Final Year Report	UMPLIB GAMBANG	FTKKP .F43 2024 r Bc. (Browse shelf(Opens below))	Not for loan		T000004168

Faculty of Chemical and Process Engineering Technology

Final Year Report (Bachelor of Chemical Engineering ) -- Universiti Malaysia Pahang Al-Sultan Abdullah - 2024

Include bibliographical reference

The effluent from plasticizer manufacturing industry contains a high quantity of pollutants that are generated from chemical additives. This effluent has negative effects on human health and the environment. The source of industrial effluents highly influences the properties, composition, and content of pollutants. The objective of this research is to remove the turbidity in the plasticizer wastewater. This research is focused on coagulation and flocculation process. Polyaluminium chloride (PAC) and polyacrylamide (PAM) were used as coagulant and flocculant, respectively. Safely treating this wastewater before being disposed to the natural water sources is essential for attaining the SDGs particularly Goal which is life below water. Via Newton’s optimization method, the optimum condition in removing turbidity was at 1.55 mL of polyarylamide dosage with a percentage removal of 20.69%.