Normal view MARC view ISBD view

The effect of iron powder particle size to the cracked core defect - a case study on molded inductor (HM72A-12XXX) / Siti Anom Lehan

By:

Siti Anom Lehan

Material type: Text

TextPublication details: Kuantan, Pahang : UMP, 2013Description: xv, 40 p. : ill. (some col.) ; 30 cm. + 1 CD-ROMISBN:

THE0005858(Local)

Subject(s):

Crack defects

Dissertation note: Project paper (Bachelor of Manufacturing Engineering) -- Universiti Malaysia Pahang -- 2013 Abstract: Cracked core defect is a visible fracture or point of separation which appear on the surface of the part, but does not propagate through the entire thickness of the part. In semiconductor industries, it is a challenge to manufacture products that is free of crack defects. The effect of iron powder particle size to the cracked core defect has been studied in this research. This research is conducted at molded inductor section at BI Technologies Corporation Sdn Bhd. The part HM72A-12XXX series has been selected as a case study because it has the highest number of reject with the percentage of 34.1 percent. In order to obtain sample with different average particle size, two samples of iron powder from different supplier has been selected. These two powders are ATMIX11 and TP-18. The size of TP-18 is smaller than ATMIX-11, ranging from 6µm - 8µm while ATMIX-11 is 12µm after the particle size distribution analysis. The surface morphology, roughness and the width of crack are observed from the experimental results. The results show that a larger particle size is better than small particle size because the percentage of crack defect by using ATMIX-11 is lower than TP-18 which is 9.4 percent and 18.1 percent respectively.

Tags from this library: No tags from this library for this title. Log in to add tags.

Average rating: 0.0 (0 votes)

Holdings ( 2 )
Title notes ( 3 )

Holdings
Item type	Current library	Call number	Copy number	Status	Date due	Barcode
Final Year Report	UMPLIB PEKAN	TA445 .A56 2013 rs Bc. (Browse shelf(Opens below))	1	Not for loan		0000080329
Final Year Report	UMPLIB PEKAN	CD 7768 \| TA445 .A56 2013 rs Bc. (Browse shelf(Opens below))	1	Not for loan		0000080330

Project paper (Bachelor of Manufacturing Engineering) -- Universiti Malaysia Pahang -- 2013

Bibilography : p. 50

Cracked core defect is a visible fracture or point of separation which appear on the surface of the part, but does not propagate through the entire thickness of the part. In semiconductor industries, it is a challenge to manufacture products that is free of crack defects. The effect of iron powder particle size to the cracked core defect has been studied in this research. This research is conducted at molded inductor section at BI Technologies Corporation Sdn Bhd. The part HM72A-12XXX series has been selected as a case study because it has the highest number of reject with the percentage of 34.1 percent. In order to obtain sample with different average particle size, two samples of iron powder from different supplier has been selected. These two powders are ATMIX11 and TP-18. The size of TP-18 is smaller than ATMIX-11, ranging from 6µm - 8µm while ATMIX-11 is 12µm after the particle size distribution analysis. The surface morphology, roughness and the width of crack are observed from the experimental results. The results show that a larger particle size is better than small particle size because the percentage of crack defect by using ATMIX-11 is lower than TP-18 which is 9.4 percent and 18.1 percent respectively.